- Thông tin sản phẩm
- Thông tin kỹ thuật
Ventilated UV-resistant high density polypropylene (PP) safety helmet. Polyethylene cradle: 8 fixing points. Sweat band. Manual adjustment: head sizes 53/63 cm. 2 possible positions of the headband (high/low) for better comfort. Helmet with adjustable ventilation.
EN397:2012 + A1:2012 Protective helmets for industry
+50°C -10°C Standard temperatures - -10°C / +50°C
Protective helmets for industry.
- Impact*: force transmitted to the headform must not exceed 5 kN at the fall of an object of 5 kg from a 1m height.
The impact energy of the helmet at the end of the test is 49 J.
- Penetration*: the tip of the mass used in the test (3 kg over 1m) must not come into contact with the skull.
- Flammability: the helmet should not burn with flame emission more than 5 seconds after removal of the flame.
* The impact and penetration tests are performed at room temperature, at 50°C and at -10°C
In extreme temperatures: impact and penetration tests are conducted at room temperature at 150°C, at -20°C or -30°C.
Protects against lateral compression.
The maximum deformation of the helmet should be ≤ 40 mm.
Protects against accidental short-term contact with a live electrical conductor up to 440 VAC
Resistance to molten metal splashes