EN 397 – Protection from falling objects
Our industrial safety helmets comply with standard EN 397, which states that they must be designed to protect the wearer from falling objects. Protection against mechanical impacts to the head safeguards the user against possible consequences such as brain injuries or skull fractures. The standard also includes protection against lateral deformation of the helmet, as well as protecting the wearer from dangerous head injuries.
Industrial safety helmets that comply with standard EN 397 generally meet the following safety requirements:
All helmets certified according to EN 397 must meet these requirements.
- shock absorption, vertical
- penetration resistance (against sharp and pointed objects)
- flame resistance
- chin strap attachment: chin strap releases at minimum 150N and maximum 250 N
EN 50365 – Insulating helmets for use on low voltage installations
Protection against electric shocks and prevention of dangerous electric current passing through the head – requirements:
- All helmets must also meet the requirements in accordance with EN 397.
- Protection against alternating voltage of up to 1000 V (AC) or direct voltage up to 1500 V (DC)
- Insulating helmets must not contain any conductive parts.
- Air vents (if available) must not allow any accidental contact with live parts.
EN 12492 – Helmets for mountaineers
Protection against hazards that may occur during activities undertaken by mountaineers – requirements:
- Shock absorption, vertical, frontal, lateral, dorsal
- Penetration resistance
- Carrier element (chin strap releases at min. 500N)
- Strength of carrier element: Chin strap may exhibit maximum elongation of 25mm
- Carrier element effectiveness: Helmet must not slide from the head